Run Hiren's BootCD From USB Flash Drive (USB Pen Drive)
Step 1
Connect USB Pen Drive (1GB or more)
Connect USB Pen Drive (1GB or more)
Step 4
Extract the Hirens BootCD and Copy everything to the USB Flash Drive
Step 5
Copy grldr and menu.lst from grub4dos.zip (or from HBCD folder) to the usb drive
Extract the Hirens BootCD and Copy everything to the USB Flash Drive
Step 5
Copy grldr and menu.lst from grub4dos.zip (or from HBCD folder) to the usb drive
Step 6
You are done..Restart PC..Test Your USB Drive
Make sure you set your computer to boot from USB Flash Drive
You are done..Restart PC..Test Your USB Drive
Make sure you set your computer to boot from USB Flash Drive
Tips on how to boot from USB Drive
To Enter the BIOS press the "Del" button on your keyboard. Alternatives are
"F1", "F2", "Insert", and "F10". Some PC's BIOS might even require a different
key to be pressed. Commonly a PC will show a message like
"Press [Del] to enter Setup" to indicate that you need to press the "Del" key.
Some AMI BIOS require you to enable the option "USB Keyboard Legacy support"!
For AMI BIOS:
- Go to "Feature Setup". "Enable" these options: "USB Function Support",
"USB Function For DOS" and "ThumbDrive for DOS". Go to "Advanced Setup".
Set the "1st Boot Device" to "USB RMD-FDD".
Reboot the PC and it now should boot from the Usb Stick.
- Go to "USB Mass Storage Device Configuration". Select "Emulation Type"
and set it to "Harddisk". Go to the "Boot Menu" and set the "1st boot device" to "USB-Stick". Exit the BIOS, saving the changes.
you can try "Emulation Type" to "Floppy" or "Forced FDD".
For PHOENIX/AWARD BIOS:
Go to "Advanced BIOS Features". Go to the "1st Boot device" and set it to "USB-ZIP".
Go to "Advanced BIOS Features". Go to the "1st Boot device" and set it to "USB-ZIP".
Comments
Post a Comment